HOW TO RESET THE PASSWORD System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info PC = 0xfff0a530, Vector = 0x500, SP = 0x680127c8 PC = 0xfff0a530, Vector = 0x500, SP = 0x680127b0 C2600 platform with 65536 Kbytes of main memory PC = 0xfff0a530, Vector = 0x500, SP = 0x80004864 monitor: command "boot" aborted due to user interrupt rommon 1 > ? alias set and display aliases command boot boot up an external process break set/show/clear the breakpoint confreg configuration register utility cont continue executing a downloaded image context display the context of a loaded image cookie display contents of cookie PROM in hex dev list the device table dir list files in file system dis display instruction stream dnld serial download a program module frame print out a selected stack frame help monitor builtin command help history monitor command history meminfo main memory information repeat repeat a monitor command reset system reset set display the monitor variables stack produce a stack trace sync write monitor environment to NVRAM sysret print out info from last system return tftpdnld tftp image download unalias unset an alias unset unset a monitor variable xmodem x/ymodem image download rommon 2 > ? alias set and display aliases command boot boot up an external process break set/show/clear the breakpoint confreg configuration register utility cont continue executing a downloaded image context display the context of a loaded image cookie display contents of cookie PROM in hex dev list the device table dir list files in file system dis display instruction stream dnld serial download a program module frame print out a selected stack frame help monitor builtin command help history monitor command history meminfo main memory information repeat repeat a monitor command reset system reset set display the monitor variables stack produce a stack trace sync write monitor environment to NVRAM sysret print out info from last system return tftpdnld tftp image download unalias unset an alias unset unset a monitor variable xmodem x/ymodem image download rommon 3 > confreg ? illegal argument usage: [] rommon 4 > confreg 0x2142 You must reset or power cycle for new config to take effect rommon 5 > reset System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 65536 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0xf76e54 Self decompressing the image : ################################################# ################################################################################ ################################################################################ ##################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 000092 0X000B3280 C2600 Dual Ethernet 0X00098670 public buffer pools 0X00211000 public particle pools TOTAL: 0X0035C8F0 If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 3Mb. Using 5 percent iomem. [3Mb/64Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong Image text-base: 0x80008098, data-base: 0x8184D2DC Port Statistics for unclassified packets is not turned on. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2611 (MPC860) processor (revision 0x202) with 62093K/3443K bytes of memory . Processor board ID JAB0316075K (3890829329) M860 processor: part number 0, mask 49 2 Ethernet interfaces 1 Serial interface 32K bytes of NVRAM. 16384K bytes of processor board System flash (Read/Write) --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: n Press RETURN to get started! *Mar 1 00:00:35.598: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Mar 1 00:00:38.599: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up *Mar 1 00:00:41.600: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down *Mar 1 00:00:41.600: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to up *Mar 1 00:00:41.600: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 1, changed state to up *Mar 1 00:00:42.601: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down *Mar 1 00:21:45.235: %LINK-5-CHANGED: Interface Ethernet0/0, changed state to a dministratively down *Mar 1 00:21:45.235: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm inistratively down *Mar 1 00:21:45.235: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to a dministratively down *Mar 1 00:21:45.588: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a) Router>, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong *Mar 1 00:21:45.592: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start *Mar 1 00:21:46.301: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to down *Mar 1 00:21:46.305: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 1, changed state to down Router>enable Router#enable secret ch1cken ^ % Invalid input detected at '^' marker. Router#copnfig t ^ % Invalid input detected at '^' marker. Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#enable secret ch1cken Router(config)#line vty 0 ? <1-181> Last Line number Router(config)#line vty 0 181 Router(config-line)#password ch1cken Router(config-line)#login Router(config-line)#copy run start ^ % Invalid input detected at '^' marker. Router(config-line)#^Z Router# *Mar 1 00:23:02.494: %SYS-5-CONFIG_I: Configured from console by consolecopy % Incomplete command. Router#copy run start Destination filename [startup-config]? Building configuration... [OK] Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#config- Router(config)#config-register 0x2102 Router(config)#do copy run start Destination filename [startup-config]? Building configuration... [OK] Router(config)#exit Router#exi *Mar 1 00:24:33.639: %SYS-5-CONFIG_I: Configured from console by consolet Router con0 is now available Press RETURN to get started. erase startup config---------> deletes only the startup config System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 65536 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0xf76e54 Self decompressing the image : ################################################# ################################################################################ ################################################################################ ##################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 000092 0X000B3280 C2600 Dual Ethernet 0X00098670 public buffer pools 0X00211000 public particle pools TOTAL: 0X0035C8F0 If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 3Mb. Using 5 percent iomem. [3Mb/64Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong Image text-base: 0x80008098, data-base: 0x8184D2DC Port Statistics for unclassified packets is not turned on. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2611 (MPC860) processor (revision 0x202) with 62093K/3443K bytes of memory . Processor board ID JAB0316075K (3890829329) M860 processor: part number 0, mask 49 2 Ethernet interfaces 1 Serial interface 32K bytes of NVRAM. 16384K bytes of processor board System flash (Read/Write) Press RETURN to get started! *Mar 1 00:00:35.470: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Mar 1 00:00:38.583: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to a dministratively down *Mar 1 00:00:38.587: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm inistratively down *Mar 1 00:00:38.587: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to down *Mar 1 00:00:38.843: %SYS-5-CONFIG_I: Configured from memory by console *Mar 1 00:21:43.456: %LINK-5-CHANGED: Interface Ethernet0/0, changed state to a dministratively down *Mar 1 00:21:44.005: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 1, changed state to down *Mar 1 00:21:44.005: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down *Mar 1 00:21:45.516: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong *Mar 1 00:21:45.520: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start Router>enable Password: Router#copy flash: tftp: Source filename []? ?File name not specified %Error parsing filename (Unknown error 0) Router#show flash System flash directory: File Length Name/status 1 16216012 c2600-advsecurityk9-mz.124-1a.bin [16216076 bytes used, 561136 available, 16777212 total] 16384K bytes of processor board System flash (Read/Write) Router#copy flash: tftp:c2600-advsecurityk9-mz.124-1a.bin Source filename []? c2600-advsecurityk9-mz.124-1a.bin Address or name of remote host []? tintin-server Translating "tintin-server"...domain server (255.255.255.255) ?Invalid host address or name %Error parsing filename (Invalid IP address or hostname) Router#copy flash: tftp:c2600-advsecurityk9-mz.124-1a.bin Source filename [c2600-advsecurityk9-mz.124-1a.bin]? Address or name of remote host []? 192.168.1.100 Destination filename [c2600-advsecurityk9-mz.124-1a.bin]? %Error opening tftp://192.168.1.100/c2600-advsecurityk9-mz.124-1a.bin (Socket er ror) Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fa 0/0 ^ % Invalid input detected at '^' marker. Router(config)#interface fa0/0 ^ % Invalid input detected at '^' marker. Router(config)#interface f Router(config)#interface ? Async Async interface BVI Bridge-Group Virtual Interface CDMA-Ix CDMA Ix interface CTunnel CTunnel interface Dialer Dialer interface Ethernet IEEE 802.3 Group-Async Async Group interface Lex Lex interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-PPP Virtual PPP interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing range interface range command Router(config)#interface e0/0 Router(config-if)#show config ^ % Invalid input detected at '^' marker. Router(config-if)#do show config Using 744 out of 29688 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$60Ay$kde9sLQEj2kyUKUknNXyS. ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 no ip address shutdown half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! no ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 password ch1cken login line vty 5 181 password ch1cken login ! ! end Router(config-if)#ip address 192.168.1.25 % Incomplete command. Router(config-if)#ip address 192.168.1.25 255.255.255.0 Router(config-if)#do copy run start Destination filename [startup-config]? Building configuration... [OK] Router(config-if)#^Z Router# *Mar 1 00:29:43.547: %SYS-5-CONFIG_I: Configured from console by consoleping Protocol [ip]: Target IP address: 192.168.1.100 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.100, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface e0/0 Router(config-if)#shutdown Router(config-if)#no shut Router(config-if)# *Mar 1 00:30:42.500: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Mar 1 00:30:43.502: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to up Router(config-if)#exit Router(config)#copy run start ^ % Invalid input detected at '^' marker. Router(config)#^Z Router#co *Mar 1 00:31:08.719: %SYS-5-CONFIG_I: Configured from console by consolepy run start Destination filename [startup-config]? Building configuration... [OK] Router#ping 192.168.1.100 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.100, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) Router#ping 192.168.1.100 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.100, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) Router#ping 192.168.1.100 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.100, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms Router#ping 192.168.1.100 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.100, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms Router#show flash System flash directory: File Length Name/status 1 16216012 c2600-advsecurityk9-mz.124-1a.bin [16216076 bytes used, 561136 available, 16777212 total] 16384K bytes of processor board System flash (Read/Write) Router#copy flash: tftp Source filename []? c2600-advsecurityk9-mz.124-1a.bin Address or name of remote host []? 192.168.1.100 Destination filename [c2600-advsecurityk9-mz.124-1a.bin]? !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 16216012 bytes copied in 113.678 secs (142649 bytes/sec) Router# Route IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong *Mar 1 00:51:10.576: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold startr> Router>enable Router#copy xmodem nvram Destination filename [nvram]? startup-config Erase flash: before copying? [confirm]n Begin the Xmodem or Xmodem-1K transfer now... CCCCCCCCCCBB0BB0 %Error opening xmodem: (I/O error) Router#000045a Translating "B1000000000045a"...domain server (255.255.255.255) Translating "B1000000000045a"...domain server (255.255.255.255) (255.255.255.255)% Unknown command or computer name, or unable to find computer address Router# Router#copy xmodem nvram Destination filename [nvram]? startup-config Erase flash: before copying? [confirm]n Begin the Xmodem or Xmodem-1K transfer now... CCCCCC Verifying checksum... OK (0xAB81) 768 bytes copied in 13.579 secs (57 bytes/sec) Router#show run Building configuration... Current configuration : 629 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 no ip address shutdown half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 ! ! end Router# copy start run %% Non-volatile configuration memory invalid or not present Router#reload Proceed with reload? [confirm] *Mar 1 00:54:35.015: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload command. System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 65536 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0xf76e54 Self decompressing the image : ################################################# ################################################################################ ################################################################################ ##################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 000092 0X000B3280 C2600 Dual Ethernet 0X00098670 public buffer pools 0X00211000 public particle pools TOTAL: 0X0035C8F0 If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 3Mb. Using 5 percent iomem. [3Mb/64Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong Image text-base: 0x80008098, data-base: 0x8184D2DC Port Statistics for unclassified packets is not turned on. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2611 (MPC860) processor (revision 0x202) with 62093K/3443K bytes of memory . Processor board ID JAB0316075K (3890829329) M860 processor: part number 0, mask 49 2 Ethernet interfaces 1 Serial interface 32K bytes of NVRAM. 16384K bytes of processor board System flash (Read/Write) --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: n Would you like to terminate autoinstall? [yes]: Press RETURN to get started! *Mar 1 00:00:35.434: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Mar 1 00:00:35.434: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up *Mar 1 00:00:35.434: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down *Mar 1 00:00:36.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to down *Mar 1 00:00:36.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 1, changed state to down *Mar 1 00:00:36.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down *Mar 1 00:01:03.576: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm inistratively down *Mar 1 00:01:03.592: %LINK-5-CHANGED: Interface Ethernet0/0, changed state to a dministratively down *Mar 1 00:01:03.592: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to a dministratively down *Mar 1 00:54:35.073: %IP-5-WEBINST_KILL: Terminating DNS process *Mar 1 00:54:36.584: %SYS-5-RESTART: System restarted -- Cisco Router> Route IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong *Mar 1 00:54:36.584: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold startr> Router> Router>enable Router#dir nvram %Error opening flash:/nvram (No such file or directory) Router#dir Directory of flash:/ 1 -rw- 16216012 c2600-advsecurityk9-mz.124 -1a.bin 2 -rw- 768 startup-config 16777212 bytes total (560304 bytes free) Router#copy xmodem nvram Destination filename [nvram]? router-config Erase flash: before copying? [confirm]n Begin the Xmodem or Xmodem-1K transfer now... CCCCC Verifying checksum... OK (0xAB81) 768 bytes copied in 11.611 secs (66 bytes/sec) Router#show run Building configuration... Current configuration : 629 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 no ip address shutdown half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 ! ! end Router# Router#show startup Router#show startup-config startup-config is not present Router#copy xmodem startup-config Destination filename [startup-config]? Begin the Xmodem or Xmodem-1K transfer now... CCCC[OK] 768 bytes copied in 19.003 secs (40 bytes/sec) Router# Router#show sta Router#show start Router#show startup-config Using 768 out of 29688 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$60Ay$kde9sLQEj2kyUKUknNXyS. ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 ip address 192.168.1.25 255.255.255.0 half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! no ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 password ch1cken login line vty 5 181 password ch1cken login ! ! end ^Z^Z^Z^Z^Z^Z^Z^Z^Z^Z Router#show run Building configuration... Current configuration : 629 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 no ip address shutdown half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 ! ! end Router#reload Proceed with reload? [confirm] *Mar 1 00:58:20.415: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload command. System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:Specials for info C2600 platform with 65536 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0xf76e54 Self decompressing the image : ################################################# ################################################################################ ##################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 000092 0X000B3280 C2600 Dual Ethernet 0X00098670 public buffer pools 0X00211000 public particle pools TOTAL: 0X0035C8F0 If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 3Mb. Using 5 percent iomem. [3Mb/64Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong Image text-base: 0x80008098, data-base: 0x8184D2DC Port Statistics for unclassified packets is not turned on. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2611 (MPC860) processor (revision 0x202) with 62093K/3443K bytes of memory . Processor board ID JAB0316075K (3890829329) M860 processor: part number 0, mask 49 2 Ethernet interfaces 1 Serial interface 32K bytes of NVRAM. 16384K bytes of processor board System flash (Read/Write) Press RETURN to get started! *Mar 1 00:00:35.466: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up *Mar 1 00:00:38.595: %LINK-5-CHANGED: Interface Ethernet0/1, changed state to a dministratively down *Mar 1 00:00:38.595: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm inistratively down *Mar 1 00:00:38.595: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to up *Mar 1 00:00:38.731: %SYS-5-CONFIG_I: Configured from memory by console *Mar 1 00:58:21.005: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 1, changed state to down *Mar 1 00:58:21.005: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down *Mar 1 00:58:22.504: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(1a), RE LEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 27-May-05 15:09 by hqluong *Mar 1 00:58:22.508: Router>%SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start *Mar 1 00:58:23.509: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/ 0, changed state to down Router> Router> Router> Router>enable Password: Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#show run ^ % Invalid input detected at '^' marker. Router(config)#^Z Router#sho *Mar 1 00:58:57.673: %SYS-5-CONFIG_I: Configured from console by consolew run Building configuration... Current configuration : 758 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$60Ay$kde9sLQEj2kyUKUknNXyS. ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 ip address 192.168.1.25 255.255.255.0 half-duplex ! interface Serial0/0 no ip address shutdown ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip classless ! no ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 password ch1cken login line vty 5 181 password ch1cken login ! ! end Router#