config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#show config ^ % Invalid input detected at '^' marker. Router(config)#do show         show run ^ % Invalid input detected at '^' marker. Router(config)#do show run Building configuration... Current configuration : 563 bytes ! version 12.4 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected --More--  ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 no ip address shutdown half-duplex ! interface Serial0/0 no ip address shutdown ! ip classless ! --More--  no ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 login ! ! end Router(config)#interface fa0/0 ^ % Invalid input detected at '^' marker. Router(config)#interface fa0/0fa0/0 a0/0 a0/0  0/0e0/0 Router(config-if)#duplex  Router(config-if)#duplex fu Router(config-if)#duplex full Router(config-if)#? Interface configuration commands: access-expression Build a bridge boolean access expression arp Set arp type (arpa, probe, snap) or timeout backup Modify backup parameters bandwidth Set bandwidth informational parameter bgp-policy Apply policy propagated by bgp community string bridge-group Transparent bridging interface parameters carrier-delay Specify delay for interface transitions cdp CDP interface subcommands clns CLNS interface subcommands cmns OSI CMNS crypto Encryption/Decryption commands custom-queue-list Assign a custom queue list to an interface dampening Enable event dampening default Set a command to its defaults delay Specify interface throughput delay description Interface specific description diffserv diffserv (Provisioning) dot1q dot1q interface configuration commands dot1x Interface Config Commands for 802.1x duplex Configure duplex operation. eou EAPoUDP Interface Configuration Commands --More--   Router(config-if)#ip add Router(config-if)#ip address 192.16                 in  ip add Router(config-if)#ip address ? A.B.C.D IP address dhcp IP Address negotiated via DHCP pool IP Address autoconfigured from a local DHCP pool Router(config-if)#ip address 192.168.1.254 255.255.255.0 Router(config-if)#^Z Router# 00:16:05: %SYS-5-CONFIG_I: Configured from console by consoleline vty           Router#line vty 0 ? % Unrecognized command Router#line vty 0            config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#host ? WORD This system's network name Router(config)#host   Router(config)#hostname ? WORD This system's network name Router(config)#hostname R) 0R0  R0(config)#show run ^ % Invalid input detected at '^' marker. R0(config)#do    sho   do show run Building configuration... Current configuration : 584 bytes ! version 12.4 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname R0 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected --More--  ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 ip address 192.168.1.254 255.255.255.0 shutdown full-duplex ! interface Serial0/0 no ip address shutdown ! ip classless ! --More--  no ip http server no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 login ! ! end R0(config)#interface e0/0 R0(config-if)#no shut R0(config-if)# 00:18:24: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up R0(config-if)#inter     quit    exit R0(config)#interface se R0(config)#interface serial   s0/0 ^ % Invalid input detected at '^' marker. R0(config)#interface serial s0/0s0/0  R0(config-if)#ip addre R0(config-if)#ip address 172.16.144.1   1 255.255.0.0   224  55.224 R0(config-if)#no shut R0(config-if)#l  00:21:17: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down R0(config-if)#clock R0(config-if)#clock ? rate Configure serial interface clock speed R0(config-if)#clock rate 56000 R0(config-if)#li  exit R0(config)#http  R0(config)#http      ip h R0(config)#ip ht` R0(config)#ip ht`  R0(config)#ip http ser R0(config)#ip http server ? R0(config)#ip http server   R0(config)#? Configure commands: aaa Authentication, Authorization and Accounting. access-list Add an access list entry alarm-interface Configure a specific Alarm Interface Card alias Create command alias appfw Configure the Application Firewall policy archive Archive the configuration arp Set a static ARP entry async-bootp Modify system bootp parameters backhaul-session-manager Configure Backhaul Session Manager banner Define a login banner bba-group Configure BBA Group boot Modify system boot parameters bridge Bridge Group. buffers Adjust system buffer pool parameters busy-message Display message when connection to host fails call Configure Call parameters call-history-mib Define call history mib parameters carrier-id Name of the carrier associated with this trunk group cdp Global CDP configuration subcommands chat-script Define a modem chat script --More--   class-map Configure QoS Class Map clns Global CLNS configuration subcommands clock Configure time-of-day clock cns CNS agents config-register Define the configuration register configuration Configuration access connect cross-connect two interfaces control-plane Configure control plane services crypto Encryption module default Set a command to its defaults default-value Default character-bits values define interface range macro definition dialer Dialer commands dialer-list Create a dialer list entry diffserv Differentiated Services (COPS) dnsix-dmdp Provide DMDP service for DNSIX dnsix-nat Provide DNSIX service for audit trails do To run exec commands in config mode dot1x Dot1x Global Configuration Commands downward-compatible-config Generate a configuration compatible with older software dspfarm Enable the dspfarm service enable Modify enable password parameters --More--   end Exit from configure mode eou EAPoUDP Global Configuration Commands errdisable Error disable event Event related configuration commands exception Exception handling exit Exit from configure mode file Adjust file system parameters flow-sampler-map Flow sampler configuration frame-relay global frame relay configuration commands ftp-server FTP Server configuration commands help Description of the interactive help system hostname Set system's network name identity Identity Configuration Commands interface Select an interface to configure ip Global IP configuration subcommands isis Global ISIS configuration subcommands iua Configure ISDN user Adaptation Layer ixi IXI Config command kerberos Configure Kerberos key Key management kron Kron interval Facility l2tp-class l2tp-class configuration li-view LI View --More--   line Configure a terminal line logging Modify message logging facilities login Enable secure login checking login-string Define a host-specific login string mac-address-table Configure the MAC address table map-class Configure static map class map-list Configure static map list memory Configure memory management memory-size Adjust memory size by percentage menu Define a user-interface menu microcode configure microcode mls mls global commands modemcap Modem Capabilities database monitor Monitoring different system events mop Configure the DEC MOP Server multilink PPP multilink global configuration netbios NETBIOS access control filtering no Negate a command or set its defaults ntp Configure NTP parser Configure parser partition Partition device password Configure encryption password (key) policy-manager Policy Manager configuration commands --More--   policy-map Configure QoS Policy Map port-channel EtherChannel configuration ppp PPP global configuration printer Define an LPD printer priority-list Build a priority list privilege Command privilege parameters process Configure process process-max-time Maximum time for process to run before voluntarily relinquishing processor prompt Set system's prompt queue-list Build a custom queue list random-detect-group Configure random-detect class rbe Commands for Routing RFC 1483 Ethernet encapsulated packets regexp regexp commands resource Configure Embedded Resource Manager (ERM) resume-string Define a host-specific resume string rif Source-route RIF cache rlogin Rlogin configuration commands rmon Remote Monitoring route-map Create route-map or enter route-map command mode router Enable a routing process scheduler Scheduler parameters --More--   R0(config)#net R0(config)#netbios ? access-list Define NETBIOS station access list name-cache Set name cache parameters R0(config)#netbios         line tvy   vty 0 ? <1-181> Last Line number R0(config)#line vty 0 181 R0(config-line)#ser R0(config-line)#service  R0(config-line)#service ? % Unrecognized command R0(config-line)#service         password R0(config-line)#password ch1cken R0(config-line)#login R0(config-line)#exit R0(config)#service ? alignment Control alignment correction and logging compress-config Compress the nvram configuration file config TFTP load config files dhcp Enable DHCP server and relay agent disable-ip-fast-frag Disable IP particle-based fast fragmentation exec-callback Enable exec callback exec-wait Delay EXEC startup on noisy lines finger Allow responses to finger requests hide-telnet-addresses Hide destination addresses in telnet command linenumber enable line number banner for each exec nagle Enable Nagle's congestion control algorithm old-slip-prompts Allow old scripts to operate with slip/ppp pad Enable PAD commands password-encryption Encrypt system passwords prompt Enable mode specific prompt pt-vty-logging Log significant VTY-Async events sequence-numbers Stamp logger messages with a sequence number slave-log Enable log capability of slave IPs tcp-keepalives-in Generate keepalives on idle incoming network connections tcp-keepalives-out Generate keepalives on idle outgoing network connections --More--   R0(config)#service pass R0(config)#service password-encryption e ? R0(config)#service password-encryption   R0(config)#do show run Building configuration... Current configuration : 681 bytes ! version 12.4 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname R0 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! no ip dhcp use vrf connected --More--  ! ! no ip ips deny-action ips-interface ! ! ! ! ! ! ! ! ! interface Ethernet0/0 ip address 192.168.1.254 255.255.255.0 full-duplex ! interface Serial0/0 ip address 172.16.144.1 255.255.255.224 clockrate 56000 ! ip classless ! ip http server --More--  no ip http secure-server ! ! ! control-plane ! ! ! ! line con 0 line aux 0 line vty 0 4 password 7 1511035D07212E2A login line vty 5 181 password 7 104D0148061C1705 login ! ! end R0(config)#